← Main psychrometric calculator
Relative Humidity and Enthalpy to Dew Point Temperature Converter
Enter the known properties and either total pressure or height above sea level to calculate dew point temperature.
Calculator inputs
Dew Point Temperature
°C
Calculation history
No calculations saved on this page yet.
Input calculation
Find the dry bulb temperature by matching the supplied enthalpy or specific volume along the constant relative humidity curve.
Pv = (RH / 100) × Psat(Tdb)
W = 0.622 × Pv / (P − Pv)
h = 1.005 Tdb + W (2500 + 1.88 Tdb)
Formula for dew point temperature
The temperature at which air becomes saturated when cooled at the same water vapour partial pressure. Below freezing the calculation uses saturation over ice.
Psat(Tdp) = Pv
Symbols
- Tdb
- Dry bulb temperature (DB), in °C.
- Tdp
- Dew point temperature (DP), in °C.
- W
- Intermediate water-vapour mass per kilogram of dry air, obtained from q/(1 − q) when known.
- RH
- Relative humidity, in percent.
- h
- Moist-air enthalpy (ET), in kJ/kg dry air.
- Pv
- Water vapour partial pressure (PV), in kPa.
- Psat
- Saturation vapour pressure at the temperature in parentheses, in kPa.
- P
- Total atmospheric pressure (PT), in kPa.
Worked example
Relative Humidity 45.389339 % · Enthalpy 52.900253 kJ/kg dry air · height 0 m
Dew Point Temperature = 14.20 °C
More calculations with these inputs
Relative Humidity and Enthalpy to All Properties
- Relative Humidity and Enthalpy to Dry Bulb Temperature Converter
- Relative Humidity and Enthalpy to Specific Humidity Converter
- Relative Humidity and Enthalpy to Wet Bulb Temperature Converter
- Relative Humidity and Enthalpy to Specific Volume Converter
- Relative Humidity and Enthalpy to Vapour Pressure Converter